فروش رفته :5
تعداد موجود:5

ماژول شتاب سنج دیجیتال ADXL362 GY-362

مشخصات محصول:

سنسور: MEMS
رنج اندازه گیری(measurement range): ± 2 , ± 4 , ± 8 g
خروجی: SPI
حساسیت: resolution within the range of ± 2 g of 1 mg / LSB
چیپ اصلی: ADXL362(ultra low power)
ولتاژ تغذیه: 1.6V to 3.5V

0 مردم در حال مشاهده این محصول در حال حاضر!

5 عدد در انبار

5 عدد در انبار

x

قیمت محصول:​

184,200 تومان

ارسال رایگان برای سفارش های بالای 5 میلیون تومان

چنانچه جمع صورت حساب شما بالای 5 میلیون تومان شود هزینه پست برای شما به صورت رایگان محاصبه خواهد شد.

پرداخت امن

افزایش اطمینان خاطر شما

تضمین قیمت محصولات

کمترین قیمت در سطح همکاران

تضمین کیفیت و اصالت

فروش مستقیم از شرکت

ارسال سریع سفارشات

با پست پیشتاز و پیک

ماژول شتاب سنج دیجیتال ADXL362 GY-362:

ماژول شتاب سنج دیجیتال ADXL362 GY-362 یک شتاب سنج سه محوره با هسته مرکزی ADXL362 می باشد و ولتاژ تغذیه آن 5 ولت است. برای اندازه گیری شتاب و حرکت و لرزش در سه محور می توان استفاده کرد. از انجایی که خروجی های آن به ولتاژ 3.3 ولت پول اپ شده است به راحتی می توان با ماژول های 5 ولتی و 3.3 ولتی ارتباط برقرار نمود.

مشخصات ماژول شتاب سنج دیجیتال ADXL362 GY-362:

سنسور : MEMS
خروجی: SPI
چیپ اصلی: ADXL362(ultra low power)

ADXL362 is an ultra low power, 3 axis MEMS accelerometer, the output data power consumption is less than 2Hz when the rate is 100 A, Power consumption in motion triggered wake mode is 270 nA. Different with the use of periodic sampling to achieve low power consumption,ADXL362 did not pass through under sampling mixed input signal. It uses the full data rate to sample the entire bandwidth of the sensor.
ADXL362 typically provides 12 bit output resolution. When the lower resolution is sufficient, also provide 8 bit data output to achieve a more efficient single byte transfer. The measurement range is ±2 g, ±4 g and ±8 g, within the range of 2 g, the resolution is 1 mg/LSB. The noise level requirements of less than ADXL362, the normal value 550 g/ V H’s
using can choose one of the two low noise mode, power supply current increase minimum.
In addition to ultra low power consumption, ADXL362 has many features to achieve real system level energy saving. The device contains a deep multi mode output FIFO, a built in micro power temperature sensor and several motion detection modes, including threshold adjustable sleep and wake mode, In this mode the power consumption is as low as 270 nA when the rate is about 6 HZ.